| TEST | PROCEDURE | General
Purpose CF25, CF50, CF100, CF200, CFS100 & CFS200 |
| Dielectric withstanding Voltage | V-Block
Method, 3 x Limiting Voltage
Duration - 1 minute |
 R
= ±(0.5% +0.05 Ohm) |
| Insulation Resistance | V-Block
Method, DC 500V
Duration - 1 minute |
10000 M Ohm |
| Temperature Cycling | 5 Cycles of -65°C, 25°C, 150°C, 25°C | R
= ±(0.5% +0.05 Ohm) |
| Short Term Overload | 2.5
X rated Voltage
Duration - 5 seconds |
R
= ±(1% +0.05 Ohm) |
| Damp heat (Steady State) | 40°C,
95% relative humidity,
Duration - 56 days |
R
= ±(5% +0.05 Ohm) |
| Load Life | Rated
Voltage at 70°C ambient
Duration - 1000 hrs. Condition : 1.5 hrs. ON 0.5 hr OFF |
R
= ±(5% +0.05 Ohm) |
| Extended Life | Rated
Voltage at 70°C ambient
Duration - 10000 hrs. Condition : 1.5 hrs. ON 0.5 hr OFF |
- |
| Robustness of Terminations | Tensile
: 10N, Duration : 10 seconds
Bending : 180°, >3 bends Torsion : 3 Rotations of 360° each |
R
= ±(0.5% +0.05 Ohm) |
| Resistance to Soldering Heat | Temp
: 260°C ± 5°C
Duration - 10 seconds |
R
= ±(1.0% +0.05 Ohm) |
| Shock (Medium impact) | 1 Km/S² | R
= ±(1.0% +0.05 Ohm) |
| Vibration (High Frequency) | 10 to 2000 Hz : 200m/s² | R
= ±(1.0% +0.05 Ohm) |
| Low Temperature Exposure | At
-65°C,
Duration : 2 hrs. |
R
= ±(1.0% +0.05 Ohm) |
| High Temperature Exposure | At
+155°C
Duration : 16 hrs., No load condition |
R
= ±(5% +0.05 Ohm) |
| Solderability | DIP
Method, solder Bath Temp : 230°C ±5°C
Duration : 5 seconds |
 95% |
| Resistance to Solvents | Solvent
: Trichloroethylene,
Duration : 1 minute |
MIL
- STD 202
Method 215 |
| Shelf Life | 1 Year | - |